We use cookies to make your experience of our website better. Some of the cookies we use are essential for parts of the site to operate and have already been set. Find out more about the cookies we use and how to block or delete cookies here. By continuing to browse this site, you are agreeing to our use of cookies.
Comb Harrow Tined Weeder
A multi-purpose tool, the Comb Harrow consists of fine spring tines, mounted on a contour-flexing frame.
Its main use is for weeding crops and reducing chemical costs.
It may also be used to break up capped soil or as a conventional harrow for seedbed preparation / harrowing.
Ultimate contour following ability for uneven ground
Even pressure is applied across every inch of the working width. The frame adapts to the ground contours with additional pressure being supplied from the accumulator to even the harrowing pressure across the working width.
Active harrow bed suspension on the implement frame.
An flexible harrow bed adapts to ground undulations.
The flexible design of the tine beds allow them to follow the contours of the land ensuring effective coverage and even tine pressure. Each 1.5m bed has 48 tines spaced at 30mm centres apart and as well as ensuring good tine pressure onto the ground, this design allows it to self-clean as it moves through the weeds.
Quick and simple tine angle and pressure adjustment, ground conditions will determine how aggressive tine pressure needs to be for effective harrowing. On the OPICO Comb Harrow there are 10 tine angle settings so pressure can be altered, ensuring the vibrating action of the triple coil spring tine can be maximised.
The oil hardened spring wire has three times the service life of a normal sprung steel wire.
The construction of the headstock consists of interlocking pieces of steel so the Comb Harrow doesn't just rely on the welding for strength. The frames and beds are powder-coated and most of the other steel parts are anodised so your harrow will stay in good working order and looking newer for longer.
When in transport position, the hydraulic and scissor folding models fold up between to 2.5m and 3m dependant on the model of Comb Harrow. This allows for easy transportation on the road and through narrow gateways.
Hydraulic cylinder with accumulator and hydraulic shut-off valve can be locked for safe road transport.
The rigid, non-folding Comb Harrows consist of 3 models, 1.5m, 2m and the larger model at 3m wide.
All three models can be supplied with either Category 1 or 2 pins if specified at the time of order.
The hydraulic folding models consist of 7 widths, 4.5m, 5m, two 6m versions, 6.4m, 7.5m and 8m.
The 6m comes in two different formats, one unit has 3x2m sections the other has 4x1.5m sections. The 3 section unit is able to fold down to 2.5m for transport which enables easier movement through narrow gateways and down the road. On the other hand the 4 section unit folds to 3m for transport but has improved contour following ability in the field.
The 9m, 10.5m, 12m, 12.4m and 15m uses a hydraulic scissor folding system to keep this wider range of machines to a transport width of or under 3m. The 15m machine is also available in a semi-mounted model that has a smaller transport height and width but needs more HP as its weight is more.
The 15m, 18m, and the big 24m uses a semi-mounted hydraulic scissor folding system to keep the wider range of the machines to a transport width of or uder 3m.
NON-FOLDING - 6mm TINES |
|||||
Model No |
Working Width |
Transport Width |
Transport Height |
HP Req |
Weight |
1731010 |
*1.5m |
2.0m |
1.45m |
10 |
145kg |
1731011 |
*2.0m |
2.0m |
1.45m |
13 |
165kg |
1731012 |
*3.0m |
3.0m |
1.45m |
15 |
260kg |
*NOTE: 1.5m 2.0m and 3.0m units supplied with CAT 1 pins unless specified with order. |
|||||
HYDRAULIC-FOLDING - 6mm TINES |
|||||
Model No |
Working Width |
Transport Width |
Transport Height |
HP Req |
Weight |
1732022 |
4.5m |
2.5m |
1.45m |
20 |
390kg |
1732032 |
5.0m |
2.5m |
1.70m |
25 |
440kg |
1732042 |
6.0m |
3.0m |
2.20m |
40 |
530kg |
1738046 |
6.0m |
2.5m |
POA |
40 |
520kg |
1732043 |
6.4m |
3.0m |
2.60m |
40 |
550kg |
1732052 |
7.5m |
2.8m |
3.15m |
50 |
710kg |
1732062 |
8.0m |
2.8m |
3.25m |
55 |
740kg |
SCISSOR FOLDING - 6mm TINES |
|||||
Model No |
Working Width |
Transport Width |
Transport Height |
HP Req |
Weight |
1732073 |
9.0m |
2.8m |
2.75m |
60 |
1010kg |
1732082 |
10.5m |
2.8m |
3.50m |
65 |
1050kg |
1732092 |
12.0m |
3.0m |
3.40m |
70 |
1170kg |
1732093 |
12.4m |
3.0m |
3.50m |
75 |
1220kg |
1732093 |
15.0m |
3.0m |
4.00m |
80 |
1800kg |
SEMI MOUNTED MODELS - 6mm TINES |
|||||
Model No |
Working Width |
Transport Width |
Transport Height |
HP Req |
Weight |
1735622 |
15.0m |
2.8m |
2.40m |
90 |
2800kg |
1735032 |
18.0m |
2.8m |
2.40m |
110 |
2990kg |
1735035 |
21.0m |
POA |
POA |
POA |
POA |
1735042 |
24.0m |
2.8m |
2.40m |
150 |
3950kg |
Optional Extras |
||
Model No. |
Description |
|
179353 |
Front leveling board 1.5m |
|
179354 |
Front leveling board 2m |
|
179359 |
Pair support wheels |
|
179304 |
1.5m section complete with 6mm tines |
|
179308 |
2.0m section complete with 6mm tines |
|
1 tine-Ext |
1 set, 1-tine extension kit 7mm |
|
1732042A |
Front mount kit (up to 6m widths, not retrofitable) |
|
1793551 |
Hydraulic tine adjustment |
|
17941811 |
Fence protector - (Left) |
|
17941812 |
Fence protector - (Right) |
As a result of the currency volatility prices are subject to change without notice. Pricing on orders placed with our sales office is only guaranteed when an official order confirmation has been received from OPICO.
To download the September 2019 product price list click the image above
To download and view our Product Price List you will need the free Adobe Reader
If you don't already have this Click Here to download the Adobe Reader